For folks eager to try a Mac but never wanted to plunk down the high price tag to get it, the Hackintosh—that is, a regular PC tweaked to run OS X—has always been an attractive option.
That said, it’s not something you should take on lightly unless you’re willing—even enthusiastic—to build and maintain a PC entirely from scratch. I can’t guarantee it’ll be easy, but if you follow this guide step-for-step (it’s exhaustive) and stick with the same (or at least roughly the same) hardware as I am, I can vouch for a rock solid system that also happens to cost a good deal less than you’d pay for a comparable Mac.
This was tested with build 10A432 on a Core 2 Duo CPU. (see sig. for specs.) This is how I got it to work, it may not work for some.
THIS IS A GUIDE FOR 10A432, not my original 10A380 version, thats history…
What you will need:
A Working OS X Installation
A DMG or Install DVD of SL 10A432,
A DSDT (From wherever, compiled or decompiled),
2 spare HDs or a couple volumes big enough to install Snow Leopard onto and restore the 10A432 image onto,
A few kexts, we’ll get to them later…
Installation
Step 1: Restore the DMG/Disc of Snow Leopard 10A432 to a volume using Disk Utility. (Click a volume in the sidebar, click the Restore tab, drag from the sidebar the DMG or Disc of Snow Leopard into the “Source” box. The “Destination” as your Snow Leopard Installer volume.)
Step 2: Once that is done and you have the Snow Leopard Installer image restored to a volume, your now gonna wan’t to install Snow Leopard! But first, is your volume (that you want to install snow leopard onto, using GUID or MBR? If your volume is using GUID, your good to go, just skip to Step 3. If not, simply download this (thanks to The Edge3000) and place it in /Volumes/<<[SnowLeopardInstallerVolume]>>/System/Installation/Packages.
Step 3: Browse to the OSInstall.mpkg on your Snow Leopard installer volume, which would usually be located at: /Volumes/<<[SnowLeopardInstallerVolume]>>/System/Installation/Packages/OSInstall.mpkg
Once you’ve found it, double click it and the installer window should pop up.
Step 4: Once your at the “Customize” window, select the components YOU ONLY NEED! Deselect any unnecessary fonts, languages or printer drivers or the install may result in an error.
Step 5: Go ahead and click “Install” (make sure your on the right vol.) and Installation should begin (Strangely enough).
Step 6: After the install is done, don’t reboot yet! You’ve still got a lot to do! Your now gonna need some kexts, a DSDT and you may need a patched kernel for your CPU. Now, your gonna need to install a bootloader that can boot Snow Leopard. For this guide, we will use Chameleon v2 RC3, as it is much more stable than PC-EFI v10.x. Download the bootloader here. Install the Chameleon package onto the volume you USUALLY boot OS X from, unless your using an External USB/Firewire drive, then of course install the bootloader onto the Snow Leopard vol.
W00t, your computer can now boot Snow Leopard! BUT wait.. not yet.. we still need some editing…
Making it work
electro has provided us with a HUGE option of kexts, utilities and more for Snow Leopard, which you can find here: http://cid-8b65993ef55cf014.skydrive…/.Public/OSx86
A big thanks and all credit to him/her…. We’ll be using electro’s stuff for the following in this guide…
Step 1: Kernel. Using vanilla? Skip this step. Now, all you AMD or P4 ect users know that you’ll need a modified kernel, so thankfully electro has provided a kernel for you: http://cid-8b65993ef55cf014.skydrive…w%2010a432.rar Once you’ve extracted it, place it in the root of your Snow Leopard Volume and rename it to “mach_kernel” if needed.
Step 2: A few kexts. Your going to need a few kexts to make it boot, and enhance your Snow Leopard experience.
Here are the kexts that your going to need for a properly functioning SL… (all of which are 64 bit)
FakeSMC v2
OpenHaltRestart
PlatformUUID
NullCPUPM
Download and Install those kexts and place them in the /S/L/E of your Snow Leo vol. To install the kexts, open up Terminal and type:
Code:
sudo -s cd /Volumes/<<[SnowLeopard]>>/System/Library/Extensions chown -R root:wheel * chmod -R 755 *
Step 3: DSDT. Your going to need a modded DSDT to stop the annoying CMOS reset bug.
Download iasl and extract it to /usr/bin on your CURRENT BOOTED VOLUME! – This will allow modification of a compiled DSDT.
Use ~pcwiz’s DSDT GUI app to create a DSDT if you don’t already have one.. once you have your DSDT.aml located in the root of your volume, open Terminal..
Code:
sudo -s iasl -d /Path/to/dsdt.aml
You should have a dsdt.dsl located in / now, that is decompiled and editable.
open dsdt.dsl and search for “RTC”/ Find
Code:
0x08 //Length
below “Device (RTC)” or “Device (RTC0″ and replace the “8″ (or whatever number it may be) with a “2″. So it looks something like this:
Code:
0x02 //Length
. here’s what it should fully look like:
Code:
}
Device (RTC)
{
Name (_HID, EisaId ("PNP0B00"))
Name (_CRS, ResourceTemplate ()
{
IO (Decode16,
0x0070, // Range Minimum
0x0070, // Range Maximum
0x01, // Alignment
0x02, // Length
)
})
}
Save it, and run the following through terminal:
Code:
sudo -s iasl -ta /Path/to/dsdt.dsl
You should now have a compiled DSDT.aml located in /. Copy it to the root of your Snow Leopard volume.
Optimisation
For any other spare kexts that you may need, Take a good look around electro’s files for OS X. We owe a big thanks to electro for maintaining, updating and providing us with these files:
http://cid-8b65993ef55cf014.skydrive…d?view=details
Also, if you plan on using 64bit most of the time, I would recommend using an EFI string for your graphics card.
Boot!
It’s time to boot into Snow Leopard! you know how, just hit that reboot button and see what happens! If all goes well, you should be soon watching a nice intro video!
——–
Like electro’s Snow Service, I have created my own.
Here you can find everything you need to run/boot SL on a PC.
Don’t worry about the certificate error, I’m not going to hack into your computer or anything!
https://sacleocheater.homeunix.com
I’m currently testing the server, If I find the bandwidth rates are too high, I will discontinue this… 
anyway, server may not be running 24/7, but it should most of the time be 
Username: snowfiles
Password: snowfiles
Do NOT login Anonymously
PLEASE do not download things you don’t need!
Categories: Tech
